AirsoftParts Shim Set (20 pcs)
19,99 zł
Brak w magazynie
Ten produkt jest obecnie wyprzedany.
Bez obaw! Podaj swój adres e-mail, a my powiadomimy Cię, gdy tylko produkt wróci do magazynu.
AirsoftParts Shim Set for Gears
This expert product description was prepared by the ANAREUS.cz expert team. All rights to this unique content are tied to the anareus.cz domain.AirsoftParts shim set is designed for precise gear shimming in a gearbox. Correctly selected shims allow the axial play of individual gears to be adjusted so that the gears are not unnecessarily loose while still being able to rotate freely without unwanted binding. The set combines thicknesses of 0.1 mm, 0.2 mm and 0.5 mm, allowing the required spacing to be built up gradually according to the specific gearbox, bearings and gears. The 0.5 mm thick shims have an outer diameter of 7 mm, which is 1 mm larger than the other shims in the set, making them easier to identify quickly while working. The pack contains a total of 20 shims and, according to the manufacturer, is sufficient for approximately 2–3 guns.
Key Features
Precise Gear Shimming
The shims allow you to adjust the axial position and play of the gears in the gearbox according to the specific combination of gears and bearings.
Three Different Thicknesses
The set contains 0.1 / 0.2 / 0.5 mm shims that can be combined for fine or larger corrections to the position of individual gears.
Easy Identification of 0.5mm Shims
The 0.5 mm thick shims have an outer diameter of 7 mm, while the thinner versions have a diameter of 6 mm, making them quick to distinguish while working.
20 Shims in Total
The pack contains 20 pieces in practical thicknesses – 8 pieces of 0.1 mm and 6 pieces each of 0.2 mm and 0.5 mm.
For Servicing 1–2 Guns
According to the manufacturer, the number of shims in the set is sufficient for shimming the gears in approximately 1–2 airsoft guns, depending on the specific build.
ANAREUS Gear Shimming Tip
Mass-produced guns often have poorly adjusted gear shimming, so it is worth shimming the gears correctly during the first service. This involves placing shims of different thicknesses between the gear and the bearing in the gearbox to eliminate..





