MANCRAFT PDiK HPA Conversion Kit for AEG V2 Long Gen3 (6 mm) – CNC Gearbox

<h5>Technical Specifications</h5>
<ul>
<li><strong>System Type:</strong> Pneumatic Drop-In Kit (PDiK)</li>
<li><strong>Firing Mode:</strong> Semi-auto only</li>
<li><strong>Compatibility:</strong> Rifles with AEG <a href=”https://kamaradsvyhodami.cz/en/dictionary/mechabox” target=”_blank”>V2.5 gearbox</a> (except CYMA CM.098)</li>
<li><strong>Nozzle Length:</strong> 24.0 mm (can be swapped for standard AEG nozzle)</li>
<li><strong>Gearbox Material:</strong> CNC 7075 T652 aluminum</li>
<li><strong>Operating Pressure:</strong> 7–16 bar (100–230 PSI)</li>
</ul>
<h5>Approximate Muzzle Velocity (with 550 mm inner barrel a 0.20g BBs)</h5>
<ul>
<li>8 bar – 150 m/s (492 FPS)</li>
<li>10 bar – 165 m/s (541 FPS)</li>
<li>12 bar – 182 m/s (597 FPS)</li>
<li>16 bar – 203 m/s (666 FPS)</li>
<li>18 bar – 213 m/s (699 FPS)</li>
</ul>
<h5>Package Contents</h5>
<ul>
<li>PDiK V2 long Gen3 HPA Kit</li>
<li>CNC V2 Gearbox (modified)</li>
<li>CNC extension</li>
<li>6mm air hose (1.2 m)</li>
</ul>
<h5>Warning</h5>
<ul>
<li><strong>Cannot be used in CYMA CM.098 (SR-25) weapons.</strong></li>
<li>Some guns may require minor shell modification.</li>
<li>Gearbox is not complete – trigger, trigger stop, and selector plate must be installed.</li>
<li>Use a proper pressure regulator (e.g., Mancraft MMR or EPeS MaxFlow) and hose adapter.</li>
<li>QD fitting is not included – must be purchased separately.</li>
<li>System uses 6mm hose – match your fittings accordingly.</li>
</ul>